BLOG
10" LED Ring Light with Tripod Stand Instruction Manual
2020-06-17

10" Ring Light with Tripod Stand & Phone Holder for YouTube Video, Desktop Camera Led Ring Light for Streaming, Makeup, Selfie Photography Compatible with iPhone Android


How to Assemble Ring Light


Precautions for use:

! No battery, No charging.

! Please chose reputable brand, certificate compliant DC 5V adapter.

It is better to choose a 12w or larger adaptor to power the ring light. If the adaptor power is smaller than 12w, it may happens over heating protection to cut off the ring light automatically.

2.The slight noise is unavoidable, if you chose power bank to drive the ring light.

3.Ta: -20°C~50C

4. IP20, Never use it in damp environment, such as in the rain, in the bathroom etc.


No battery, No charging

Please chose reputable brand, certificate compliant DC 5V adapter. It is better to choose a 12w or larger adaptor to power the ring light. If the adaptor power is smaller than 12w, it may happens over heating protection to cut off the ring light automatically.


How to Assemble Ring Light to Tripod?

1. Prepare❷Tripod.

2. Unscrew the tripod cover.

3. Turn the screw counterclockwise to loosen the screw.

4. Use both hands to divide the corner frame into two sides.

5. Pull the holder up first, then rotate the holder to fixed it.

6. Tripod assembly completed.

7. Prepare Pan-Tlt and ❺Mobile dip.

8. Install the Mobile clip on the Pan-Tlt tighten it as shown in the direction of the arrow.

9. Loosen the bottom screw and have a certain gap for easy installation on the ring light.

10. Mount the assembled mobile phone holder on the ring of the ring light.

11. As shown in the figure, press the clamp with your finger and rotate until tightened.

12. Mobile phone bracket installation completed.

13. Install the❸Pan-Tilt on the ring lamp and rotate until tightened.

14. Pan-Tlt and ring light assembly completed.

15. Install the Pan-Tilt on the tripod and rotate until tightened.

16. Put the cell phone on the cell Mobile clip.

17. Complete assembly.

18. After USB is powered on, it can be used.


Work as a selfie stick: